When painting, it's important to prep your area before you begin. Paint will not stick to a surface with dirt on it, so cleaning your surface before painting is important. I used a scrub brush and rag dipped in a Lysol/water mix on the stairs to get them ready to paint after I'd used that same mix and rag to wipe down the ceiling, walls, shelves and other trim.
While my clean surfaces dried, I gathered my painting supplies. I prefer to use a 4" roller because it doesn't suck up as much paint and doesn't get as heavy as you continue to paint. I think the ease of use makes up for the smaller surface area with each stroke. I also used a small, plastic paint tray. Normally, I'd have used a larger paint tray that could be cleaned up and used again, but having a 1 year old has severely limited my time. I needed a quick, easy clean up, which also meant a cheap brush to do my trim work.
Please
note, because I used a cheap brush on the trim for the white, I had to
buy a new brush to use on the black - the first brush was a mess and
there was no way I was going to get an edge on the stairs with that
blown brush. Moral of the story? Use a good brush from the beginning.I began by painting the Antique White. I worked in small sections, painting the trim and corners first, and then filling in with the roller. Working in small spaces helps with blending between paint brush strokes and paint roller marks. It makes for a cleaner finish if you transition from the brush marks on the trim to the roller while the paint is still wet. Because I was painting the ceiling the same color as the walls, I didn't have to tape off the ceiling. Keeping the paint color the same from walls to ceiling helps make a space look bigger.
After 24 hours, I started taping off my space to start the black paint. I had decided earlier that I was only going to paint part of the riser black along with the tops of the stairs. Because the white was freshly painted, I was careful of the type of tape I used. I tried the FrogTape(R) for delicate surfaces because it is made for newly-painted ares. I found, however, that it wasn't sticking well because my surface was uneven - 60 years of use will do that I guess.
I ended up free handing the black paint along the edges because the paint wasn't working as well as just carefully using the brush. Again, I had to use a new, more expensive brush for this trim work to help keep the lines straight. I was also able to keep a good line with my roller as long as I didn't have a ton of paint on the roller. By just adding pressure to the outside, I was able to keep the line straight. I then feathered that in with a brush and used the roller to fill in the center.
As I painted the stairs, I painted every other stair so I wouldn't get caught in the basement. I allowed the paint to dry for the prescribed 3 hours (check your paint can for a repaint time) and then finished the job with the remaining stairs.
Stay tuned for the wallpaper finish!
